[:ro]Rasina 3D Phrozen CLEAR SC-801[:en]Phrozen Shape Series: SC-801 Clear Resin[:]

Descriere

[:ro]

Specificații

Volum: 500g /sticlă

Rezoluția XY: 0,075 mm

Parametrii print: 20 sec @ 50 um (Phrozen Shuffle )

Rășină foarte transparentă.

Modul de curățare a părții imprimate: Utilizați spray-ul de alcool pentru a curăța modelele și a le usca cu pistolul de aer. Nu scufundați partea tipărită în alcool mai mult de 30 de secunde.

Compatibilă cu imprimanta: Phrozen Shuffle , Shuffle XL.

Aplicație: piese  optice, modele transparente.

[:en]DESCRIPTION
Specification & Performance

Weight: 500g per bottle
XY Resolution: 0.075 mm
Layer Height / Parameter: 20 sec @ 50 um (Phrozen Shuffle / Make ParaLED)
Key Performance: Highly transparent resin. Not easy to yellowish in post-curing. Recommend to use low power UV curing light to do post-cure.
Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.
Compatible Printer: Phrozen Shuffle, Shuffle XL, Make ParaLED, Make XL ParaLED.
Application: Optical part, transparent models.

About Resin Operation

Avoid sun light exposure.
After printing, stored used resin in closed and opaque bottle. ​​
DO NOT mix fresh resin and used resin.
Shake or stir resin properly to avoid pigment separation.
​​DO NOT dump resin. Please cured resin and treat/recycle it as general plastics garbage.
Safety Recommendation

​​Do your best to wear glove, goggles, long sleeves shirt during usage of resin. Wash hands after every operation.
​​DO NOT swallow resin. Go to hospital if you do it.
​​Avoid eye contact by resin. Rinse with water and go to hospital if resin contacts eyes.
​​Resin might cause slight skin irritation. Stop using it if allergy occurred.
Resin smells. We strongly suggest you to use it under ventilated condition.
Keep resin in room temperature(15 – 35 Celsius) and dry condition.
Keep resin away from kid.[:]