Specification & Performance
Weight: 500g per bottle
XY Resolution: 0.075 mm
Layer Height / Parameter: 20 sec @ 50 um (Phrozen Shuffle / Make ParaLED)
Key Performance: Highly transparent resin. Not easy to yellowish in post-curing. Recommend to use low power UV curing light to do post-cure.
Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.
Compatible Printer: Phrozen Shuffle, Shuffle XL, Make ParaLED, Make XL ParaLED.
Application: Optical part, transparent models.
About Resin Operation
Avoid sun light exposure.
After printing, stored used resin in closed and opaque bottle.
DO NOT mix fresh resin and used resin.
Shake or stir resin properly to avoid pigment separation.
DO NOT dump resin. Please cured resin and treat/recycle it as general plastics garbage.
Do your best to wear glove, goggles, long sleeves shirt during usage of resin. Wash hands after every operation.
DO NOT swallow resin. Go to hospital if you do it.
Avoid eye contact by resin. Rinse with water and go to hospital if resin contacts eyes.
Resin might cause slight skin irritation. Stop using it if allergy occurred.
Resin smells. We strongly suggest you to use it under ventilated condition.
Keep resin in room temperature(15 – 35 Celsius) and dry condition.
Keep resin away from kid.